Home › Problems › Slab Leak & Hidden Leak
Problems · Harrisburg, PASlab Leak & Hidden Leak in Harrisburg, PA
A slab leak is a supply line leaking under the concrete floor of a home built on a slab. The pipe is buried in or under the concrete, and the leak runs where nobody can see it — under the floor, inside the slab, or in the ground beneath it. The signs are indirect: a warm spot on the floor where a ho
Talk with a local plumbing professional
Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Call NowWhat a slab leak is
A slab leak is a supply line leaking under the concrete floor of a home built on a slab. The pipe is buried in or under the concrete, and the leak runs where nobody can see it — under the floor, inside the slab, or in the ground beneath it. The signs are indirect: a warm spot on the floor where a hot-water line is leaking underneath, a water bill that jumps with no change in use, low pressure at every tap, the sound of running water when everything is off, or a floor that is damp, buckling, or warm in one patch. A slab leak can run for weeks or months before anyone notices, because the water is contained by the slab and the floor covering, and the damage spreads through the slab and the framing before the stain appears.
In Harrisburg, slab leaks follow the same housing pattern as every other hidden leak. The supply lines under the slab are copper or galvanized steel installed when the house was built, and they fail where the concrete has shifted, where the pipe rubs against the slab, or where corrosion has thinned the wall. Freeze-thaw cycles move the ground a little every year, and the pipe moves with it. The leak detection page explains the instruments — acoustic listening, thermal imaging, pressure testing, moisture mapping — and this page is the slab-leak guide: the signs, the finding, and the repair.
How a slab leak is found
The finding starts with the meter test: everything off, watch the meter. A moving meter confirms water is leaving the system, and the rate gives a sense of the leak's size. The system is then divided — hot from cold — and each section is pressure-tested, so the leak is narrowed to one line. Acoustic equipment listens for the hiss of escaping water through the slab, and thermal imaging shows the warm patch the leak creates on the floor above it. The two together narrow the location to a small area, often within inches, and the location is marked on the floor before any opening is made. The repair starts at the marked point, not at a guess.
Repairing a slab leak — and when to reroute instead
A slab leak is repaired through a small opening in the slab at the marked point: the concrete is opened, the leaking section is exposed, the pipe is repaired with the right material for the system, and the opening is closed and the floor restored. The repair is pressure-tested, and the meter is checked again with everything off to prove the leak is gone. A slab with a second leak in a different place is a different answer: a reroute above the slab, running a new line through the walls and the attic rather than under the concrete, so the next leak — if it comes — is accessible rather than buried. The reroute costs more than a single repair, and it ends the pattern of opening the slab in a new place each time. The repiping page explains the whole-house version of the same decision.
Slab homes in the metro: where the risk sits
Slab construction is common in the post-war ranches and split-levels across the metro — Mechanicsburg, Camp Hill, Hershey's newer neighbourhoods, and the subdivisions on the edges of every town. The supply lines in those homes run under the concrete floor, and the leak risk sits where the pipe meets the slab: where the concrete has shifted, where the pipe rubs against the slab, or where the original installation left the pipe in contact with the concrete. Freeze-thaw cycles move the ground a little every year, and the pipe moves with it. A slab leak in a ranch is often found by the warm patch on the floor, the bill that jumps, or the sound of running water when everything is off — and the repair is a small opening in the slab at the marked point, or a reroute above the slab if the slab has leaked twice in different places.
The older homes in the city have a different version of the same problem: lines running through shared walls and under slabs in rowhomes, where a leak is heard by one household and felt by another. The instruments are the same — acoustic listening, thermal imaging, pressure testing, moisture mapping — and the goal is the same: finding the leak within inches, so the repair opens the smallest possible area. The leak detection page explains the instruments in detail.

Talk with a local plumbing professional
Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET
Call NowQuestions, answered
What does a slab leak feel like underfoot?
A warm patch on the floor where a hot-water line is leaking underneath, a bill that jumps, or the sound of running water when everything is off. The floor covering hides the water, so the signs are indirect — and the meter test confirms them.
Can a slab leak be found without tearing up the floor?
Yes. Acoustic listening, thermal imaging, pressure testing and moisture mapping narrow a leak to a small area before any opening is made. The repair opens the smallest area that gives access to the marked point.
What is the fix for a slab leak?
A small opening in the slab at the marked point, the leaking section repaired, and the opening closed — or a reroute of the line above the slab. A slab with a second leak in a different place usually argues for the reroute.
How do I know if I have a hidden leak?
Do the meter test: shut off every tap and appliance, then watch the meter. If it moves, water is leaving the system somewhere it should not be.
Need help with slab leak & hidden leak? Call Now.
Talk with a local plumbing professional about your home. Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET.
Call NowGet in touch
Call Now from any page and you will be connected with a local plumbing professional serving Harrisburg and the surrounding metro. You can also reach us by email at hello@harrisburgplumbingpros.com.
Hours: Mon–Fri 7:00 AM–10:00 PM ET · Sat 8:00 AM–10:00 PM ET · Sun 7:00 AM–9:00 PM ET.
Call Now